Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing locks, and lock is stuck in up position 200 1990

posted by  curiousheights on  Mon Feb 26 06:26 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 21 03:42 CST 2009
[RELATED]

1990 244DL

I have switched the driver's lock from Paul into Junior. However, now the lock is stuck in the up position, and I can no longer operate it from inside the car, nor will it operate the other doors. The key will turn all the way to unlock, but is obstructed by the mechanism inside the door when I try to lock it.
Prior to taking out the original lock, I could lock the doors from inside.

I only disconnected the collar, unscrewed and removed the retaining bracket, and removed the lock, then reversed the process to connect it all again.

Any suggestions would be greatly appreciated!

I think I can, I think I can, I think I can get Junior on the road.
ezsha
--
'84 244, Peter, never drove. Robbed to fix Paul, '86 244 - drove for 2 years; holey saint now, passing parts to Paul Jr, '90 244, yet to drive. Friends w/ '90 245, jokingly aka Mary, (pregnant sedan & completes PPM trilogy). Daughter to unnamed '90 745.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing locks, and lock is stuck in up position [200][1990]
posted by  curiousheights  on Mon Feb 26 06:26 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.