Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

can't get oil filter threaded tube off, need some help, thanks 200 1986

posted by  bcg on  Sat Mar 3 13:18 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 27 08:12 CST 2014
[RELATED]


all,
i'm installing a t-stat sandwich plate and an oil cooler, but i can't get the original threaded filter pipe off. i tried using 2, 3/4 x 16 nuts but they're not locking.

i want to install the threaded filter pipe that comes with the oil t-stat sandwich plate. as yall know, the original one is too short for the t-stat sand. plate.

i thought about wrapping something around the threads and using channel locks, but i'm not comfortable doing that.

i need some help with some ideas.

thanks as always,
byron golden
86 245
92 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New can't get oil filter threaded tube off, need some help, thanks [200][1986]
posted by  bcg  on Sat Mar 3 13:18 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.