Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

CD Changer - replacing OEM unit 900 1992

posted by  rrbcwb on  Tue Mar 6 16:51 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Apr 1 01:25 CST 2007
[RELATED]

The OEM 6CD changer in the trunk of my '92 940 works intermittently so I'm considering changing it. The OEM radio (CR-814) works fine so I would like to keep it. I understand an Alpine CD changer will work but requires a different cable and adapter. I've seen the VOLALP adapter that's designed for this purpose, but it's designed to connect directly to the OEM radio instead of connecting to the end of the OEM cable in the trunk. I would prefer to keep the OEM cable between the radio and the trunk, and either use a different adapter between the OEM cable and the Alpine unit, or else remove the OEM plug and install an Alpine plug on the end of the OEM cable.

Does anyone know if such an adapter exists and where I can find it, or does anyone know the pinout of the OEM cable and the Alpine plug so I could install an Alpine plug on the end of the OEM cable? Also, if a particular Alpine CD changer is recommended I would appreciate knowing that. Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New CD Changer - replacing OEM unit [900][1992]
posted by  rrbcwb  on Tue Mar 6 16:51 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.