Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tips for installing nivomats on a IRS 760 sedan 700

posted by  turbovlov on  Mon Mar 12 16:48 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 27 13:28 CST 2009
[RELATED]

I could use any tips or helpful info people have to offer about installing a self-leveling nivomat shocks in a 1988 760 turbo sedan. I have never done this before. I gather that I need to jack under the shock to compress both shock & spring and secure both with wire in a compressed state. They should be able to be pulled out then? Will the new one fit in relatively easily or does it need to be compressed somehow? How much torque needs to be applied to tighten the bolts of the shock? Any tips or answers would be great. Thank you.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tips for installing nivomats on a IRS 760 sedan [700]
posted by  turbovlov  on Mon Mar 12 16:48 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.