Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2013 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

IAC valve 900

posted by  jotvolvo on  Fri Mar 23 04:43 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 12 08:43 CST 2009
[RELATED]

Hi all,
1991, 940SE Turbo. I am chasing the rough idle situation for a while. The Idle Air Control (IAC) valve is shiny clean, but how I can check its operation. The chilton manual says to measure the resistance and it shows three pins on the IAC and the corresponding connector. But the car has an IAC which has only two pins and the corresponding connector. Please let me know how I can test it for the resistance or voltage. I measured the resistance of two pins of the IAC that shows 9 ohms.
Thanks
Ram






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New IAC valve [900]
posted by  jotvolvo  on Fri Mar 23 04:43 CST 2007 >
  • New IAC valve [900]
    posted by  someone claiming to be sredwine  on Wed Mar 28 05:26 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.