Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What size radiator trans cooling line fitting? 900

posted by  rwreagan on  Wed Apr 4 00:34 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 14 15:41 CST 2011
[RELATED]

Purchased a radiator for the 960 online. The rad came with brass fittings to attach to the radiator for the transmission cooling lines. The fittings fit in the radiator, but the nipples are too small for the female connectors on the flanged ends of the cooling lines.

The supplier of the rad is working with his supplier to provide the correct fittings, but I'm not hopeful they'll get results. Rather than return the radiator, I'm just trying to find the correct fittings. The local hardware / plumbing supply houses sell fittings of 3/8 and 1/2 inch tapered. This fitting is in a metric size, not tapered.

Hence my question: If I order the fitting online, what size do I specify to be sure it will mate up with the trans cooling line?

Thanks...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What size radiator trans cooling line fitting? [900]
posted by  rwreagan  on Wed Apr 4 00:34 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.