Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Junction Box Rebuild on an '88 240 200

posted by  Mike-C on  Fri Apr 6 16:00 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 27 11:33 CST 2014
[RELATED]

Good Evening Folks;
Has anybody had any success in rebuilding the brake junction box on a '88 240? We changed the front calipers, hoses and master cylinder on my son's car and we cannot get the brake failure light to go off. We tried the reset procedure as described in the 700 series FAQ's and the Haynes manual, but no luck. When you remove the plastic switch body there is fluid present and according to the Haynes that means the valve is leaking. Any advice, anybody got a used one?

Regards;
Mike Coleman
North Lancaster, Ontario, Canada
1988 240 Stationwagon, 280,000 miles
1992 740 Stationwagon, 181,000 miles
1984 Mercedes 300D, 311,000 miles
1986 Mercedes 300SDL, 196,000 miles
1998 GMC Safari, 396,000 kms






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake Junction Box Rebuild on an '88 240 [200]
posted by  Mike-C  on Fri Apr 6 16:00 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.