Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How hard is it pull a Hall effect distributor? 200 1986

uid 12839's pic
posted by  Paul Driver of Inga on  Tue Apr 17 15:41 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 25 16:42 CST 2012
[RELATED]

OK, that broken connector on the distributor is trying to get expensive. Broke the Hall Effect sensor for sure. Also there is no fire on the coil.

A rebuilt distributor is almost $575 plus labor. A junker is $125 and there is the pick ur part option. Before one heads off to the land of pull ur own, need to ask a question. How hard is to to pull one off an 86? There are two at the local yard and both had distributors as of two weeks ago. What kind of tools do you need, only want to walk in there with enough. The letter V is in the very back of the lot. And of course it rained today to the mud will be waiting.

Also were would you start with a no fire. Changed both harness and she was purring before all of this.

Regards,

PT






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How hard is it pull a Hall effect distributor? [200][1986]
posted by  Paul Driver of Inga  on Tue Apr 17 15:41 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.