Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

LH Injector Seals + Icky Shift Lever 200 1988

posted by  RFORT on  Sat Apr 21 08:31 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 3 23:32 CST 2013
[RELATED]

1) Just got some new injector seals. What's the yellow nipple-looking thing with the hole in the center? Does this install over the tip of the injector?

2) My 240 has auto tranny and the shift lever, which I think is basically a piece of 3/8" steel rod, is covered with a long oval shaped plastic deal with fake chrome on it, between boot and knob. The fake chrome is almost all gone, with the lovely off-white plastic now exposed. If I could figure out how to get the darn thing off I'd maybe cover it with shrink-tubing to make it look not like a piece of plastic covering the real shift lever. Or something. Anyone know of a good fix for this?

BTW...thanks to all who offered advice on the 240 tailight/bulb sensor problem. New bulb failure relay, new bulbs, everything groovy.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED LH Injector Seals + Icky Shift Lever [200][1988]
posted by  RFORT  on Sat Apr 21 08:31 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.