Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1994 940 shifter - repairing or getting parts for shifter 900

posted by  norfleet on  Sat Apr 21 15:09 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 26 15:33 CST 2013
[RELATED]

Over the past several months, my shifer (automatic) has gotten noticeably looser. I can still feel the detents between P, N, R and D - but there are no longer any detents between Drive and second gear (there is still the detent between 2nd and 1st). I managed to get the housing of the shifer apart and could not see anything broken/shifted/etc. (taking it apart was a real challange - the manual only describes up to 1993 - no info on the 1994.

Is the lack of detents between drive and 2nd in the shifter or is it in the linkage or in the trans itself?

Note - the 1994 shifter was completely redesigned (for the worse) and is completely different than 1990 to 1993 940's






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1994 940 shifter - repairing or getting parts for shifter [900]
posted by  norfleet  on Sat Apr 21 15:09 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.