Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2002 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pittman Arm Removal 140-160

posted by  Serpent6 on  Mon May 14 07:43 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 20 02:44 CST 2008
[RELATED]

Hi All,

I'm replacing the tie rods and center link rod in my 1970 142. The bolts are kinda bent and require me to remove the idler and Pittman arms to get them out. I got the idler arm out okay, but had a question about the Pittman arm. Do I simply remove the big nut on the bottom of the steering box and yank the arm off? If so, does anyone know the size of the nut holding the Pittman arm to the steering box? It's really big, so I'll have to make a special trip to buy the right socket and want to get it right.

Many thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pittman Arm Removal [140-160]
posted by  Serpent6 subscriber  on Mon May 14 07:43 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.