Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wheel bearing seals 700

posted by  volvosfive on  Tue May 15 16:03 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 21 08:01 CST 2011
[RELATED]


I'm getting ready to switch the front rotors and hubs on my '84 760 T to the two piece design. I already have all the parts. The front hubs that I have came from an '87 760 T. My question is: can I use the existing bearings that are on the '84 now that are used for the 1 piece hub/rotor? Also, which oil seals should I use? I was wondering if the seals for the one piece hub are the same as the ones found on the later two piece design.

Thanks,
Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wheel bearing seals [700]
posted by  volvosfive subscriber  on Tue May 15 16:03 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.