Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

couple questions before putting my struts back together 200 1992

posted by  cn52x5hg on  Thu May 17 07:35 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 11 17:37 CST 2013
[RELATED]

Hi,
I just received my new strut mounts and am getting ready to put the front end back together. I had 2 questions that I wasn't able to find anything on in the archives. I am hoping to finish this up soon so all help is greatly appreciated.

1. When i pulled out the old strut inserts, i noticed the bottom of the insert was liberally coated in grease. I am guessing this is to lubricate it against the bottom of the strut tower? Is it recommened I grease up the bottom of the new strut inserts? If so, is regular bearing grease sufficient?

2. When i pulled off the old strut mounts and look at the underside of the fender where they used to sit, it looks like there was some sort of yellowish adhesive between the strut mount and fender. What is this residue and is it ok to just put the new one in there without anything else?

Thanks!
Kevin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New couple questions before putting my struts back together [200][1992]
posted by  cn52x5hg subscriber  on Thu May 17 07:35 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.