The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

couple questions before putting my struts back together 200 1992

Hi,
I just received my new strut mounts and am getting ready to put the front end back together. I had 2 questions that I wasn't able to find anything on in the archives. I am hoping to finish this up soon so all help is greatly appreciated.

1. When i pulled out the old strut inserts, i noticed the bottom of the insert was liberally coated in grease. I am guessing this is to lubricate it against the bottom of the strut tower? Is it recommened I grease up the bottom of the new strut inserts? If so, is regular bearing grease sufficient?

2. When i pulled off the old strut mounts and look at the underside of the fender where they used to sit, it looks like there was some sort of yellowish adhesive between the strut mount and fender. What is this residue and is it ok to just put the new one in there without anything else?

Thanks!
Kevin






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.