Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Removal of VSS 900

posted by  Sturge on  Sun Jul 1 05:44 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 2 11:31 CST 2007
[RELATED]

Howdy! I'm trying to remove the speed sensor on my '91 940 Turbo wagon.

Is the one allen screw the only thing holding the sensor to the differential? Should it slide out after the screw is removed? Should I turn or wiggle the sensor out or should it slide straight out?

Secondly, the wires at the sensor connection are completely frayed. I don't think there is enough "slack" on the wire to cut off the offending part, reconnect it and still reach the sensor. How hard is it to replace the wires from the sensor to the connection inside the trunk/hatch by the tire well.

Thanks a bunch for your thoughts!

Tommy





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removal of VSS [900]
posted by  Sturge  on Sun Jul 1 05:44 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.