Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B23FT Exhaust Manifold - Correct Washers? 1984 760 700

posted by  DougC on  Mon Jul 2 09:52 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

I'm installing the exhaust manifold and turbo. When I removed it, there were a total of 12 washers used, six of the thick ones with "UT" on them, and six regular flat washers. What's the correct way to do this? (I have extra washers of both types from a manifold I pulled at a junkyard.) Should all 8 nuts get one of the thick washers up against the manifold, then the shroud sheet metal, then the nut? What's the correct placement for the flat washers if they are supposed to be used? Three of the cylinders have metal shrouds. Thanks for any help.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.