Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame Trap Relocation Kit. 200

posted by  Windwrapper on  Wed Jul 4 09:20 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 30 05:37 CST 2009
[RELATED]

Flame Trap Relocation Kit.

IPD had a great idea when they came up with the flame trap relocation kit. It is still very difficult to install the emission hose that connects the flame trap to the oil trap. I came up with the idea of using a 9” long piece of 1” thin wall metal tubing as a guide and stabilizer for the emission hose when pushing it onto the oil trap nipple. Put the emission hose inside the metal tube with about a half an inch of rubber sticking out the bottom. Push hose on to oil trap with with a twisting motion. You may need some large pliers to remove metal tubing. Be sure to push hose down as you pull the metal tubing off.

Happy Trails,

Mark.
--
Mark Mueller, '82 Volvo 245 - Ugly but straight, works good, B21F, Strut brace, electric radiator fan, A cam, and aluminum wheels. 2-7/8' stainless exhaust tip adds 20 hp.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame Trap Relocation Kit. [200]
posted by  Windwrapper subscriber  on Wed Jul 4 09:20 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.