I replaced my front brakes approx 500miles ago. Most of the driving was highway use with very little brake usage but there have been at least 200 city miles. I used brembo rotors and EBC Ceramic pads, all new hardware and teflon shims. I followed the break-in proceedure on the new pads and rotors. These damn things squeek like hell now. they stop extremely well, very strong and controlable not at all grabby and don't fade like the former units... but untill they get hot they really squeek. the first stop after cruising for 2-3 min is awful as far as noise goes. Has anyone else had this issue?