Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

95 oil pan gasket change problems

posted by  joeS on  Thu Oct 18 09:27 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Dec 22 14:25 CST 2012
[RELATED]

I got up enough intestinal fortitude to do the oil pan gasket on my 95 940 and I thought I was home free when I lined up the steering splines and hammered the universal joint with the clamp on to the rack spline. I put the bottom bolt in and I soon discovered the bolt was spinning and was no longer going in, so I reversed it and it won't come out either. I have tried to use a screw driver to leverage the bolt out to no avail. Do I have to take it to the shop or can I fix it . Any and all help will be appreciated. I have not dealt with something like this before. I know I screwed thing up But I don't understand.Thanks Joe S







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.