Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing out the Warm-Up Regulator in 82 242 200 1982

posted by  someone claiming to be Dave of Northern CA. on  Fri Nov 2 12:28 CST 2007 [RELATED]


Hi Guys,

I need to change out what I think is the original Warm-Up Regulator on my otherwise well-maintained 82 242 (nonturbo). As you know the WUR sits under the manifold and is attahced to the block.

I was wondering if any of you had undertaken this job before, and if so had words of advice about what I should keep in mind? Thanks.

Regards, Dave





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Changing out the Warm-Up Regulator in 82 242 [200][1982]
posted by  someone claiming to be Dave of Northern CA.  on Fri Nov 2 12:28 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.