Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

brake caliper 1, driver 0 200 1990

posted by  tjtsj on  Thu Dec 6 09:54 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 1 18:06 CST 2014
[RELATED]

So I'm putting new rotors on my 245 w/208k. Got the passenger side apart no problem. Brake line came off and caliper bolts easy. Now the drivers side brake line will not budge. I've been hitting it with pblaster for like 3 hours or so and i can't seem to make it budge. my 11mm wrench worked fine on the passenger side, but it seems like it's not tight enough to put good force on the brake line. It wants to round off the nut. I can't seem to find a 11mm flare wrench, but don't worry they make 10mm and 12mm combo ones, just not 11mm. Please help if you know any tips so I don't end up having to get a new brake line and caliper.

Thanks in advance,
Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED brake caliper 1, driver 0 [200][1990]
posted by  tjtsj subscriber  on Thu Dec 6 09:54 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.