Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help removing idle control valve 200 1985

posted by  newmex999 on  Wed Dec 19 06:08 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 21 09:05 CST 2014
[RELATED]

I have a 1985 240DL 2.3 with what I think is a idle control valve problem. The car idles kinda high 900 rpm, if I tap the air control valve the idle drops for a few seconds to normal- 700 rpm. I tried to remove the valve to clean it however it wouldn't budge.

Sprayed everything with PB Blaster first and removed hoses, removed bolt that goes around clamp securing valve. Tried to also remove bolt that secures clamp to rubber mounted triangle thingy that is mounted to the motor, however bolt just seems to spin and never come off.

What am I doing wrong?

Thanks
--
1992 240GL, 1992 240DL, 1985 240DL Wagon, 1983 240DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help removing idle control valve [200][1985]
posted by  newmex999 subscriber  on Wed Dec 19 06:08 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.