Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Throttle - Vacuum relationship 200

I recently cleaned my entire PCV system, including drilling all the gunk out of the nipple on the intake that leads to the flame trap.

Now that my crank case pressures are back under control I noticed that my idle is running at 1000rpm, rather than the 750 it was previously set at. When I start the car in the morning it starts at 750, but as soon as I give it gas and start driving it won't drop that low again.

Thoughts? do I simply need to reset my idle speed? or is something else going on?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle - Vacuum relationship [200]
posted by  someone claiming to be Volvostud  on Thu Jan 10 07:34 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.