Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

First brake job problem - too thick pads? 200

posted by  Harrry on  Thu Jan 17 09:36 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Nov 20 13:32 CST 2011
[RELATED]

Replacing front pads and rotors on my 1993 240.
Bought Brembo rotors and PBR Deluxe pads from FCP Groton.
This is my first time working on the brakes. From what I read here, I expected war with stuck rotors. Doing the right side first, everything came off perfectly - didn't even have to bang the rotor!

Here's the problem: I can't get the new pads in! Seems ridiculous. I opened the brake fluid reservoir under the hood and used the old pads and a channel lock pliers to squeeze back the caliper pistons. That's how I got the old pads out. But the new pads are so much thicker. I managed to get one in by tapping gently on the top (hope I didn't hurt the pistons) but it rubs the rotor when I turn it by hand. The other one I can't even get in at all.

Is there something I'm missing? Do I just have to press back the pistons more? If so, how else could I do it?

Thanks for you help.

Harry






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New First brake job problem - too thick pads? [200]
posted by  Harrry  on Thu Jan 17 09:36 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.