Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

One-way valve for vent switches - spring loaded or not? 200 1990

posted by  ZJZ on  Sat Feb 2 13:21 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 14:29 CST 2014
[RELATED]

Trying to track down a small vacuum leak on the climate control system in my 245. The valve that is near the intake manifold seems to open and close properly, but I have to wonder - is it supposed to be spring loaded or snap shut automatically, or it is only closed by a pressure differential? I replaced the line between the valve and the vacuum tank to no effect, and the line on the other end of the vacuum tank to the switches is solid... so does anyone know about the one-way valve?

Thanks -
Zach
Anchorage, Alaska
1990 245 w/258xxx mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New One-way valve for vent switches - spring loaded or not? [200][1990]
posted by  ZJZ subscriber  on Sat Feb 2 13:21 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.