Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Run, then No Start After In-Tank Fuel Pump & Sending Unit Replacement 200

posted by  Stormie on  Sun Mar 2 17:21 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Nov 4 14:12 CST 2013
[RELATED]

Greetings,

I was hearing increased fuel pump noise and my gas gauge was inaccurate when I got down to ~1/4 tank, so I decided to replace the in-tank pump and sending unit.

Followed Bently to the letter, except for NOT disconnecting the return line just above the differential. It didn't make sense to disconnect it, when the return line was disconnected from the sending unit.

Everythig went smoothly and it started right away, ran for ~15 seconds and stopped. It will not start. Any clues?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Run, then No Start After In-Tank Fuel Pump & Sending Unit Replacement [200]
posted by  Stormie  on Sun Mar 2 17:21 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.