Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Crank pulley/harmonic balancer. 200 1993

posted by  srburton on  Tue Mar 4 13:20 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 23 06:27 CST 2009
[RELATED]

I have run into a problem,i have the crank set to TDC i.e. the notch of the belt guide is at 12 o'clock but when i put the pulley on the shaft it is way off,like 10 o'clock,am i lining it up correctly.
Here is how i am doing it,there is 2 notches in the belt guide(big washer),one goes into the cog on the crank gear,the other goes into the slot on the pulley.I don't see any other way for it to go.Is this not right?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crank pulley/harmonic balancer. [200][1993]
posted by  srburton  on Tue Mar 4 13:20 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.