Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Motor Oil in my 1982 B23E 250k kms 200

posted by  Ned Kelly on  Thu Mar 13 19:45 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 3 21:07 CST 2009
[RELATED]

Hi guys, I guess this is something that may create a debate but I am looking for advise on what engine oil to run in my brick. The car doesn't leak or burn any oil and the motor has done 250k (B23E). I only bought it recently from a pretty fastidious owner aand he has been running a 10-40 weight semi-synth oil. I live in Sydney Australia where the average temps are about 30 deg C in Summer and 15 deg C in winter. My valves are a tad noisy on both a cold and warm engine. Question is, should I change to a mineral oil? Would a quality mineral oil 10-40 be any better at reducing the valve noise etc or should I look at 10-50 semi syth or mineral etc?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Motor Oil in my 1982 B23E 250k kms [200]
posted by  Ned Kelly  on Thu Mar 13 19:45 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.