Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What other tool could be used to remove trailing arm bushing/sleeves, PLEASE HELP!! 200

posted by  someone claiming to be 777 on  Thu Mar 20 03:36 CST 2008 [RELATED]

Greetings:


What other tool could one use aside from the TAB tool, in order to remove the old trailing arm bushings? I don't have the poly pop ins! I have the rubber OEM with the metal shells. Could I somehow incorporate a ball joint press, and or some kind of C-Clamp? I am thinking 1 good can of PB Blaster would help too? I understand the one cannot just bang this thing out! What say you? Also what is the size of the bolt, that inserts into the sleeve inside the bushing. I would probably purchase a grade 8 set, with washer/nut. Thanks in advance.


REGARDS,

1989 240/244 DL Sedan A.T. 154,000 plus original miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What other tool could be used to remove trailing arm bushing/sleeves, PLEASE HELP!! [200]
posted by  someone claiming to be 777  on Thu Mar 20 03:36 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.