Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

New meat and alloy on all four corners 120-130 1965

posted by  Deluxe on  Thu Apr 24 09:26 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 25 07:10 CST 2009
[RELATED]

Hey, All. I'm thinking about replacing the factory wheels and tires on my '65 122 wagon with some 16" x 7" Superlites with 25mm offset (same offset as the 15x6 Superlite size commonly used on 122s) and 225/60-16 tires. The original spec tires for the wagons are 185R15 which are approximately 26.25" diameter. The 225/60-16 tires are approximately 26.6" diameter, and they are approximately 1.6" wider than the 185s. I'm going for the 'fill the wheel well' look, as much as possible, without experiencing any bumping or rubbing in the wells. And I don't want extremely low profile tires. The car is on factory springs right now, and I may in the future do the 1" lowering springs. I drive the car conservately to moderately - no slamming into turns at high speeds or anything like that. I'm not worried about the tire diameter, but I am worried about the tire diameter combined with the increased width.

Any input?

Thanks!

Deluxe






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New New meat and alloy on all four corners [120-130][1965]
posted by  Deluxe  on Thu Apr 24 09:26 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.