Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ICU connector sleeves 200 1986

posted by  darmstrong on  Sat May 3 08:24 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 13 12:21 CST 2014
[RELATED]

I'm sending a spare ICU I have, to the mechanic that is working on my sister's Volvo. I noticed the sleeves I had heard about, that are installed over some of the male pins on the ICU itself.

I gather from another thread, that the sleeves were only ever installed on 3 of the ICU pins. Can someone confirm this?

Does anyone know when Volvo started delivering cars with these sleeves installed? I'd like to know before this mechanic attempts to test with this spare unit. Otherwise, if the '86 car doesn't have the sleeves on the original ICU, after a substitute test with this spare, the female pins on the harness connector will be splayed too far apart, and then the original ICU won't contact correctly.

Thanks,


--
David Armstrong - '86 240(350k km?), '93 940T(270k km), '89 240(parts source for others) near Toronto






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ICU connector sleeves [200][1986]
posted by  darmstrong  on Sat May 3 08:24 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.