Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

thinner motor mounts? 140-160

posted by  hans on  Tue May 6 18:44 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 19 15:26 CST 2014
[RELATED]

After a long hiatus I am getting back to my PV project, it has 140 suspension so the motor is mounted exactly like a 140 on the 140 crossmember.
However I don't have much clearance and would like to use slightly thinner rubber mounts at the front to drop teh motor a little,at the momment they are about 37mm,about 30mm would be great, preferably slightly stiffer ones as well, in the past I have come across mounts with 3 metal plates and 2 rubber fillings, also preferably something available in New Zealand.
Any ideas or leads ?






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.