Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Charging my 134A a/c system on my '88. Port seems too big for charger. Help. 200 1988

posted by  jgreenwood on  Sat May 24 18:56 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 11 19:10 CST 2011
[RELATED]


Hey guys. Still restoring this '88 240 and noticed that the a/c still has a bit of pressure in it although the a/c is not engaging. Apparently, so far at least, there are no big leaks, just low on 134a. It has been converted over. My question is if the low side port is where I charge it and is that the one near the dryer on the passenger side of the condensor and next to the radiator on this '88? Also, IF that port is for charging, why is it so much larger than what the kits allow that I have used in the past from the parts stores? The little snap on hose attachment on those only seem to fit smaller ports. I cannot seem to find any other ports on this model. Do I have to take this to a dealership to charge the a/c because their attachments are larger? Is there another place to charge it?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Charging my 134A a/c system on my '88. Port seems too big for charger. Help. [200][1988]
posted by  jgreenwood subscriber  on Sat May 24 18:56 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.