Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Insulation on fuel delivery pipe 200 1985

posted by  Stickbuilder on  Tue Jun 10 10:11 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 03:31 CST 2014
[RELATED]

On the fuel delivery pipe is an insulation tube of black rubber. There is a barbed fitting where the fuel line attaches to the fuel rail and the rubber tube is fitted onto the barbed fitting on the rail. Should I attach a clamp to keep the insulation tube fitted to the fuel rail, or is it okay for it to be loose there. The insulation hose runs from the fuel rail down to the lower part of the car where the firewall transitions to the foot board. I'm probably being anal about this, but I suppose the insulation is to keep the fuel from trying to vaporize before it gets to the injectors.

Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Insulation on fuel delivery pipe [200][1985]
posted by  Stickbuilder subscriber  on Tue Jun 10 10:11 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.