Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Crankshaft Position Sensor Trouble 900 1993

posted by  Bill N. on  Thu Jun 19 13:19 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 16 14:09 CST 2014
[RELATED]

On my 940 Turbo I checked the engine trouble codes and found that the crankshaft position sensor was weak and failing intermittently. The engine has lost power and seems to run hot.---- I checked the resistance and found only 198 ohms. Manuals say it should be between 200 and 500 ohms. The NEW one I just got from Groton was only 185 ohms right out of the box and I did NOT install it. I'm thinking I'll send it back because it's out of specification.

Any one have this problem in the past or currently?? Did you test the old unit and then test the new unit before you installed it?? What were the results?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crankshaft Position Sensor Trouble [900][1993]
posted by  Bill N. subscriber  on Thu Jun 19 13:19 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.