Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2013 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front wheel bearings 700 1992

posted by  Uncle Olaf on  Tue Jun 24 19:16 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 10 19:04 CST 2011
[RELATED]

Hey all,


I hope this is not a stupid question, but do the wheel bearings on the front of the '88-'92 700 series cars require repacking, or are they sealed? I was looking at the Haynes manual and it shows the taper style bearings on the pre '88 cars that were not retrofitted with the 2 piece hub and rotor assembly. It does not seem to describe the newer 2 piece style very well. My '92 needs a complete brake job and if the wheel bearings need to be repacked, I want to do it now. Also, do the rear wheel bearings get treated the same way? Or are those lubed from the axle oil? The car has about 122k miles. Thanks.

Regards, 'Uncle Olaf'






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front wheel bearings [700][1992]
posted by  Uncle Olaf  on Tue Jun 24 19:16 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.