Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Postive wire to the A/C compressor? 200 1989

uid 19592's pic
posted by  johnn on  Sun Jul 6 09:38 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 26 10:39 CST 2012
[RELATED]

Hi all, I hava a 89 240DL that the A/C compressor clutch will not engage.
I traced the problem to the postive wire going to the compressor being broken. It green and then goes into a disconnect with about 6" of black wire that has a broken end. I'm going back to check if I have voltage, but a quick question. The comressor has a small black with white top module with a wire runing to the front pully. I assume that the broken wire connected to this. Can I cut the wire from the module and splice it in to the broken end of the black wire and not have a problem?
When I bought the car 6 months ago the AC was not working, but now that its getting into the 90's it would be nice to have it. It looks like the system is still R12 there is no conversion sticker to 134a that I can find.
Thanks in advance for all your help.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Postive wire to the A/C compressor? [200][1989]
posted by  johnn  on Sun Jul 6 09:38 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.