Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front lower control arm bushings 200 1992

posted by  someone claiming to be Teal 240 on  Sat Jul 19 08:01 CST 2008 [RELATED]


I was just wondering as I was looking at the Bentley manual- if it was possible to loosen the nut to the front control arm rear bushing, take the three bolts that mount the bracket housing to the frame and take off the rear bushing without removing anything else? It seems that would be possible, then take it to the shop to have the bushing pressed in and reverse the steps. Is that all there is to it. or am I missing something? (do I have to remove the lower control arm completely if I only want to replace the rear bushing?) I look forward with thanks to the responses!

Teal 1993 Sedan
Blue 1992 Wagon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front lower control arm bushings [200][1992]
posted by  someone claiming to be Teal 240  on Sat Jul 19 08:01 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.