Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

chainsaw method (fan motor replacement) - what would you do next time? 200 1993

posted by  ronald on  Thu Aug 14 01:28 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 10 11:04 CST 2012
[RELATED]

I am really considering Don Foster's quick method for replacing the fan motor - I just don't have much extra time right now. If you've done this method - how did it work out for you and how much time did it actually save you? I've done the long method before and it took me about 8 hours as I recall. I think I could do it again in about 5 or 6 hours. Also, are the resistors prone to failure in the later models? I've never actually had one of those fail on me and was not intending to replace it.

Your comments would be appreciated.

Ron
93 245
near Brantford, ON, Can






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New chainsaw method (fan motor replacement) - what would you do next time? [200][1993]
posted by  ronald subscriber  on Thu Aug 14 01:28 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.