Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2009 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

oil cooler 120-130

posted by  selym on  Thu Aug 28 11:04 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 28 19:16 CST 2011
[RELATED]

My engine is a B-18 in a 65 122. The engine has an oil cooler fitted around the oil filter. Appears to be between the filter and the block. From what I have read the 1800 cars came with this cooler not the 122's.

My question is: can I remove it and direct fit the filter as if the cooler was never there. ? I can see the metal hose going into the head and that is an easy plate from a scrap engine. The lower hose is easy also, just wondering what is behind the cooler itself.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil cooler [120-130]
posted by  selym  on Thu Aug 28 11:04 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.