Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

What's the best (easiest) way to take off the TB for cleaning and adjustment?

posted by  eyyu on  Wed Sep 24 03:48 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 8 14:16 CST 2014
[RELATED]

I have a 91 745, a 92 244 and 93 245. All have the same LH2.4 feul control system.

I've taken the entire intake out for cleaning and adjustment when I got a "new" car in. However, I never figured out how to easily take the TB out for routine maintainance. I looks to me that the two 13mm nuts on the left are pretty easy to deal with with a 13mm sucket wrench. What about the third one right between the TB and the TPS. I don't see that any of my wrenches can fit in there. I sounds so easy to do from my readings of other people's experience and the FAQ. Could someone tell me what I'm missing here? Maybe I need to buy a new kind of wrench? Thanks a lot. Erwin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What's the best (easiest) way to take off the TB for cleaning and adjustment?
posted by  eyyu  on Wed Sep 24 03:48 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.