Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Newer factory Compressor on a 87 240 200

posted by  Photoman327 on  Thu Sep 25 02:27 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 1 10:29 CST 2014
[RELATED]

I need a little help. I have found a 92 245 in the boneyard the has 96,000 miles the I have been robbing parts. I even ran a compression check in the yard that came in at 180 to 185 PSI. My 87's compression comes in at 195 to 204 PSI. The car was hit in the right front and the accumilator hose was loose but the cars is so clean the I would be surprised it the compressor was bad. My car had R12 and the dryer had a hole and with a new dryer it should work. My questions concern hook up of the hoses of the newer compressor. I can get it for $80.00 if I pull it and $100.00 if they pull it. Any pointer on ths will be helpful.
Thanks
Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Newer factory Compressor on a 87 240 [200]
posted by  Photoman327  on Thu Sep 25 02:27 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.