Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Center support bearing 200 1989

posted by  Justin A on  Mon Nov 3 16:21 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 19 13:01 CST 2009
[RELATED]

So, I got my parts from FCP Groton, brought them to local transmission shop to be installed for $75, good price, nice guys, can't beat it.

Well, now I have a vibration when I start from a complete stop. So I am bringing her back tomorrow and I'm going to go over it with them.

I noticed the guy that did the actual work only painted one reference line between the two halves with the shaft off the car. I don't believe he marked the yokes. I also think that the rubber support may have been put on wrong. The rear diff is nice and full, and she wasn't vibrating before. U-joints are in surprisingly good shape. So here are the questions:

Which side is of the rubber support supposed to face forward toward the transmission?

And is there supposed to be any kind of lubrication between the rubber and the bearing?

Thanks,
Justin





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Center support bearing [200][1989]
posted by  Justin A  on Mon Nov 3 16:21 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.