Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing inner tie rod ends: ZF rack 700 1991

posted by  rstarkie on  Fri Nov 7 04:16 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

1991 745T 240K

The steering rack is not leaking but the inner tie rod ends need to be replaced.

I have not done this job before. The plate shows a 3 meaning it is a ZF rack. The boots are still in place. I am assuming there are flats on the rod to hold it while I remove the nuts, but what is involved with actually removing the inner tie rod end from the rack itself- how do you unscrew it?

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing inner tie rod ends: ZF rack [700][1991]
posted by  rstarkie subscriber  on Fri Nov 7 04:16 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.