|
I have an 89' 245, ipd blue springs, 25/25 bars, adj. torque and panhard, all lubed. Took a sharp left had turn this evening and "clunk, clunk, clunk, clunk" from the rear end. Drivers side. Could this be the axel bearings?
I have set the pinion angle at -4. There is some slop in the drive line at diff. when rotated back and forth clunk clunk. About 1.5-2 inches rotate back and forth between clunks. The trailing arm bushings don't appear to be sloppy and i have re torqued the rear shocks.
There are also intermittent but regular clunks from the rear end when i am driving. I think there is less clunking when i am coasting over bumps in nuetral than with the driveline engaged.
Any opinions greatly appreciated.
Jason
|