The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Disturbing noises in the rear 200 1989

I have an 89' 245, ipd blue springs, 25/25 bars, adj. torque and panhard, all lubed. Took a sharp left had turn this evening and "clunk, clunk, clunk, clunk" from the rear end. Drivers side. Could this be the axel bearings?

I have set the pinion angle at -4. There is some slop in the drive line at diff. when rotated back and forth clunk clunk. About 1.5-2 inches rotate back and forth between clunks. The trailing arm bushings don't appear to be sloppy and i have re torqued the rear shocks.

There are also intermittent but regular clunks from the rear end when i am driving. I think there is less clunking when i am coasting over bumps in nuetral than with the driveline engaged.

Any opinions greatly appreciated.
Jason






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.