Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fan Motor/Impeller Clips 200 1986

posted by  Brendy on  Sun Jan 18 15:49 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 24 10:27 CST 2011
[RELATED]

Well, after almost six years of ownership, I finally decided to attempt the blower motor in my '86 240. It's been both easier and harder than I imagined. The new motor is now mounted and test-running nicely.

But due to my ignorance of the proper removal method, I managed to break one of the metal clips that hold the impeller wheels to the motor shaft.

Can new clips be had at the dealer? Does anyone have an alternative fastener they've used successfully? Any suggestions/hard experience would be most appreciated,

Brendan in Seattle






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fan Motor/Impeller Clips [200][1986]
posted by  Brendy  on Sun Jan 18 15:49 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.