Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

nissonger gasket kits 1800

posted by  romans on  Wed Feb 18 01:27 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 27 05:42 CST 2013
[RELATED]

i have purchased a nissonger gasket kit for the guages in my 71. there are four rubber gaskets that appear to be the size of the oil temperature and water temperature guages. the other two parts are round rubber "rope" that are supposed to be for the tach and speedo. where do the gaskets go? are they for in between the glass and the guage or in between the bessel and glass. when i took mine apart, there was just a dried up black gasket between the glass and bessel. why are there four of the smaller gaskets? i tried to tell the guy at nissonger there was a larger (60mm +/-) oil pressure guage but he didn't have it or believe me. Also, when i took the bessel off the speedo and tach, there were two paper gaskets on my guages. is this the factory seal or is this something that was put on sometime in the past?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New nissonger gasket kits [1800]
posted by  romans subscriber  on Wed Feb 18 01:27 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.