Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

52mm Volvo Oil Pressure Gauge 200

posted by  johnboy740 on  Sat Feb 21 05:30 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Apr 12 13:04 CST 2012
[RELATED]

Hi all, I was at the PnP today and saw a 240 with the oil pressure and volt gauges on the dash, I think I also saw the sending unit for the oil pressure gauge on the passenger's side of the block, towards the front of the engine. It was round, about an inch and a half in diameter and had two posts for electric connections. Am I right in thinking that was the sending unit for the oil pressure gauge? Is hooking the oil and volt gauges up as straight forward as supplying 12V and a line from the gauge to the sender?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 52mm Volvo Oil Pressure Gauge [200]
posted by  johnboy740  on Sat Feb 21 05:30 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.