Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Crankshaft Position Sensor cable connection - how to unfasten? 700 1992

posted by  someone claiming to be Downrange on  Sat Mar 7 08:32 CST 2009 [RELATED]

Yes, I am an idiot. I have semi-diagnosed my 740's crank-but-no-start syndrome (intermittent) to the connection near the PS/Brake area on the firewall. It's an unusual electrical connector with a piece of wire running halfway around one of the connectors with two bent ends, and what looks like might be tabs to press on, but I can't figure it out and don't want to break it. Since when I push the two ends harder together, it starts right up, I think a good connector cleaning will restore this, at least until I can get a new cable.
Any help appreciated!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crankshaft Position Sensor cable connection - how to unfasten? [700][1992]
posted by  someone claiming to be Downrange  on Sat Mar 7 08:32 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.